K28 CLAMPS
Scroll for prices or tap the buttons below.
K28 CLAMPS
TIP: Adding products to cart gains you access to prices including GST. 🙂
Absolute staple in any fab shop.
PICTURE | Product | SKU | INFO | UNIT PRICE | SUBTOTAL | Quantity | ADD ITEM(S) |
---|---|---|---|---|---|---|---|
![]() |
180° T-Bar Clamp | K28
PRODUCT VIDEO
DESCRIPTION The 180° T-Bar Clamp is our most used clamp, they can move in vertical and horizontal planes so you can easily position your clamp where you want, how you want. MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-01
|
2.5 A36 Steel Burnished |
$34 Ex. GST
|
$34 |
|
|
![]() |
180° Hexi Clamp | K28
DESCRIPTION
Same product as our 180° T-Bar Clamp but with a hex nut, enabling you to quickly tighten and loosen your clamp with an impact driver/socket. MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-02
|
2.5 A36 Steel Burnished |
$34 Ex. GST
|
$34 |
|
|
![]() |
Vertical Handle Swivel Clamp | K28
DESCRIPTION
Our 90° Vertical Handle Swivel Clamp features a swivel action head for ease of clamping a workpiece to the side, additionally it can be used as a 180° clamp with the assistance of a locating square (seen in our angles section). MEASUREMENTS ![]() ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-03
|
2.0 A36 Steel Burnished |
$37 Ex. GST
|
$37 |
|
|
![]() |
45° T-Bar Clamp | K28
DESCRIPTION
Our 45° T-Bar Clamp works similar to our standard 180° T-Bar Clamp, but is for clamping your workpiece in two directions, giving you the ability to clamp in downward and side pressure at the same time. MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-04
|
2.5 A36 Steel Burnished |
$34 Ex. GST
|
$34 |
|
|
![]() |
45° Hexi Clamp | K28
DESCRIPTION
Our 45° T-Bar Clamp works similar to our standard 180° T-Bar Clamp, but is for clamping your workpiece in two directions, giving you the ability to clamp in downward and side pressure at the same time. Featuring a hex nut, enabling you to quickly tighten and loosen your clamp with an impact driver/socket. MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-05
|
2.5 A36 Steel Burnished |
$34 Ex. GST
|
$34 |
|
|
![]() |
180° Pin Toggle Clamp | K28
DESCRIPTION
Featuring a pin with a counter sink bolt (not needed for clamping operation) and toggle action for faster clamping, enabling a huge time decrease for those repetitive jobs. MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-06
|
1.0 Steel Zinc |
$39 Ex. GST
|
$39 |
|
|
![]() |
90° Pin Toggle Clamp | K28
DESCRIPTION
Used for clamping your workpieces to the side. Featuring a pin with a counter sink bolt (not needed for clamping operation) and toggle action for faster clamping, enabling a huge time decrease for those repetitive jobs. MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-07
|
1.0 Steel Zinc |
$39 Ex. GST
|
$39 |
|
|
![]() |
180° Stop Toggle Clamp | K28
DESCRIPTION
Featuring a Bar Stop with an oblong hole and toggle action for faster clamping, enabling a huge time decrease for those repetitive jobs. MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-08
|
1.5 Steel Zinc |
$39 Ex. GST
|
$39 |
|
|
![]() |
90° Stop Toggle Clamp | K28
DESCRIPTION Used for clamping your workpieces to the side. Featuring a Bar Stop with an oblong hole and toggle action for faster clamping, enabling a huge time decrease for those repetitive jobs. MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-09
|
1.5 Steel Zinc |
$39 Ex. GST
|
$39 |
|
|
![]() |
Two Point Bridge Clamp | K28
DESCRIPTION
![]() These clamping bridges allow you to place a clamp in the middle, thus clamping two points with one clamp! MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-10
|
1.0 Steel Powder Coat |
$51 Ex. GST
|
$51 |
|
|
![]() |
Three Point Bridge Clamp | K28
DESCRIPTION
![]() These clamping bridges allow you to place a clamp in the middle, thus clamping three points with one clamp! MEASUREMENTS ![]() Questions?
(03) 7020 0234 | sales@koweldingtables.com.au |
K28-CLP-11
|
1.5 Steel Powder Coat |
$83 Ex. GST
|
$83 |
|
|
K28 QUICK INFO

The “28” refers to its hole size of 28mm.
Heavier in weight, but more robust than the K16.
Suited for medium to heavy duty fabrication (e.g. 2mm tube to bridge cranes).
Can’t decide on K16 or K28? Check out our more info page for a more in depth analysis.

ORDER PROCESS
SUBMIT CUSTOM ENQUIRY
Similar to online shopping, add items to "your enquiry cart". Items stay there as you navigate. Click "submit enquiry" to enter contact details.
WE WILL CONTACT YOU
To finalise pre-order. We will call/ email you in the next business day to discuss your order, deposit, delivery and answer any of your questions.
WE WILL MAKE YOUR ORDER
Your custom order will now be manufactured and shipped directly to your location. Please allow approx 12 weeks from finalised order to your door.
SITE NAV
Every KO | WT product comes welded, assembled and machined to meet its precise tolerances.