K28 TOPS
& LEGS

KWT-28 grid
K28 CLAMPS

Scroll for prices or tap the buttons below.

Use buttons to navigate through sections:

KWT-28 3D standard

K28 SERIES
TOPS & LEGS

K28 CLAMPS
KWT-28 both grids

Procuret logo

Up to $75K finance available. Details ➚

 

TIP: Adding products to cart gains you access to prices including GST. 🙂

TIP: Click “SHOW PRODUCT DETAILS ▼” to see more info on each item.

PICTURE Product SKU INFO Base Price Customise SUBTOTAL Quantity ADD ITEM(S)
K28 Series Top - Custom Size

Choose your custom size: In 100mm increments - between 0.5m x 1.0m all the way up to 3.0m x 1.6m!

ALL K28 TABLE TOPS GET A FREE ETCHED RULER UPGRADE! Millimetre ruler engraved via CNC in the top perimeter around all 4 sides of the table top valued at $100 ex gst.

RULERS shrt

MATERIAL: CAST or STEEL?

1) T300 - CAST IRON

PROPERTIES: Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and etching lines are rougher (see picture below).

HARDNESS: Differs per treatments: Standard / Burnished ~240HV  |   Nitriding ~450HV.

DENSITY: 7.25 g/cm³.

TENSILE STRENGTH: 345 MPa.

 

COMPARE SURFACE OF MATERIALS:CAST vs STEEL BIG Writing

2) S355 - STEEL

PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.

HARDNESS: Differs per treatments: Standard / Burnished ~250HV  |   Nitriding ~550HV.

DENSITY: 7.80 g/cm³.

TENSILE STRENGTH: 355 MPa.

 

TREATMENT: NONE, BURNISHED or NITRIDING?

1) NONE - No surface treatment, raw material (silver in colour).
BENEFITS: Shiny silver colour.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

2) BURNISHED - Oxidation treatment (black in colour).
BENEFITS: Rust resistant.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

3) PLASMA NITRIDING - Ion Nitriding Treatment (black in colour).
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.

MATERIAL: STANDARD or DIAGONAL?

Standard (left), has a hole spacing of 100mm. Diagonal (right) has an extra hole in the centre of each 4 hole grid, allowing for more possibilities!

KWT 28 both grids 2

 

TOLERANCES

FLATNESS: ±0.01mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
 
Questions? (03) 7020 0234   |   sales@koweldingtables.com.au
 
K28-TBL-00

In 100mm increments from 1.0m x 0.5m to 3.0m x 1.6m.

$0 Ex. GST
$0
K28 Series Top - 1.0m x 0.5m

ALL K28 TABLE TOPS GET A FREE ETCHED RULER UPGRADE!

Millimetre ruler engraved via CNC in the top perimeter around all 4 sides of the table top valued at $100 ex gst.

RULERS shrt

MATERIAL: CAST or STEEL?

1) T300 - CAST IRON

PROPERTIES: Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and etching lines are rougher (see picture below).

HARDNESS: Differs per treatments: Standard / Burnished ~240HV  |   Nitriding ~450HV.

DENSITY: 7.25 g/cm³.

TENSILE STRENGTH: 345 MPa.

 

COMPARE SURFACE OF MATERIALS:CAST vs STEEL BIG Writing

2) S355 - STEEL

PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.

HARDNESS: Differs per treatments: Standard / Burnished ~250HV  |   Nitriding ~550HV.

DENSITY: 7.80 g/cm³.

TENSILE STRENGTH: 355 MPa.

 

TREATMENT: NONE, BURNISHED or NITRIDING?

1) NONE - No surface treatment, raw material (silver in colour).
BENEFITS: Shiny silver colour.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

2) BURNISHED - Oxidation treatment (black in colour).
BENEFITS: Rust resistant.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

3) PLASMA NITRIDING - Ion Nitriding Treatment (black in colour).
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.

MATERIAL: STANDARD or DIAGONAL?

Standard (left), has a hole spacing of 100mm. Diagonal (right) has an extra hole in the centre of each 4 hole grid, allowing for more possibilities!

KWT 28 both grids 2

 

TOLERANCES

FLATNESS: ±0.01mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
 
Questions? (03) 7020 0234   |   sales@koweldingtables.com.au
 
K28-TBL-01

1000 x 500

~225

Your choice

$1,843 Ex. GST
$1,843
K28 Series Top - 1.0m x 1.0m

ALL K28 TABLE TOPS GET A FREE ETCHED RULER UPGRADE!

Millimetre ruler engraved via CNC in the top perimeter around all 4 sides of the table top valued at $100 ex gst.

RULERS shrt

MATERIAL: CAST or STEEL?

1) T300 - CAST IRON

PROPERTIES: Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and etching lines are rougher (see picture below).

HARDNESS: Differs per treatments: Standard / Burnished ~240HV  |   Nitriding ~450HV.

DENSITY: 7.25 g/cm³.

TENSILE STRENGTH: 345 MPa.

 

COMPARE SURFACE OF MATERIALS:CAST vs STEEL BIG Writing

2) S355 - STEEL

PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.

HARDNESS: Differs per treatments: Standard / Burnished ~250HV  |   Nitriding ~550HV.

DENSITY: 7.80 g/cm³.

TENSILE STRENGTH: 355 MPa.

 

TREATMENT: NONE, BURNISHED or NITRIDING?

1) NONE - No surface treatment, raw material (silver in colour).
BENEFITS: Shiny silver colour.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

2) BURNISHED - Oxidation treatment (black in colour).
BENEFITS: Rust resistant.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

3) PLASMA NITRIDING - Ion Nitriding Treatment (black in colour).
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.

MATERIAL: STANDARD or DIAGONAL?

Standard (left), has a hole spacing of 100mm. Diagonal (right) has an extra hole in the centre of each 4 hole grid, allowing for more possibilities!

KWT 28 both grids 2

 

TOLERANCES

FLATNESS: ±0.01mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
 
Questions? (03) 7020 0234   |   sales@koweldingtables.com.au
 
K28-TBL-02

1000 x 1000

~345

Your choice

$2,766 Ex. GST
$2,766
K28 Series Top - 1.5m x 1.0m

ALL K28 TABLE TOPS GET A FREE ETCHED RULER UPGRADE!

Millimetre ruler engraved via CNC in the top perimeter around all 4 sides of the table top valued at $100 ex gst.

RULERS shrt

MATERIAL: CAST or STEEL?

1) T300 - CAST IRON

PROPERTIES: Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and etching lines are rougher (see picture below).

HARDNESS: Differs per treatments: Standard / Burnished ~240HV  |   Nitriding ~450HV.

DENSITY: 7.25 g/cm³.

TENSILE STRENGTH: 345 MPa.

 

COMPARE SURFACE OF MATERIALS:CAST vs STEEL BIG Writing

2) S355 - STEEL

PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.

HARDNESS: Differs per treatments: Standard / Burnished ~250HV  |   Nitriding ~550HV.

DENSITY: 7.80 g/cm³.

TENSILE STRENGTH: 355 MPa.

 

TREATMENT: NONE, BURNISHED or NITRIDING?

1) NONE - No surface treatment, raw material (silver in colour).
BENEFITS: Shiny silver colour.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

2) BURNISHED - Oxidation treatment (black in colour).
BENEFITS: Rust resistant.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

3) PLASMA NITRIDING - Ion Nitriding Treatment (black in colour).
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.

MATERIAL: STANDARD or DIAGONAL?

Standard (left), has a hole spacing of 100mm. Diagonal (right) has an extra hole in the centre of each 4 hole grid, allowing for more possibilities!

KWT 28 both grids 2

 

TOLERANCES

FLATNESS: ±0.01mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
 
Questions? (03) 7020 0234   |   sales@koweldingtables.com.au
 
K28-TBL-03

1500 x 1000

~480

Your choice

$3,522 Ex. GST
$3,522
K28 Series Top - 2.0m x 1.0m

ALL K28 TABLE TOPS GET A FREE ETCHED RULER UPGRADE!

Millimetre ruler engraved via CNC in the top perimeter around all 4 sides of the table top valued at $100 ex gst.

RULERS shrt

MATERIAL: CAST or STEEL?

1) T300 - CAST IRON

PROPERTIES: Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and etching lines are rougher (see picture below).

HARDNESS: Differs per treatments: Standard / Burnished ~240HV  |   Nitriding ~450HV.

DENSITY: 7.25 g/cm³.

TENSILE STRENGTH: 345 MPa.

 

COMPARE SURFACE OF MATERIALS:CAST vs STEEL BIG Writing

2) S355 - STEEL

PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.

HARDNESS: Differs per treatments: Standard / Burnished ~250HV  |   Nitriding ~550HV.

DENSITY: 7.80 g/cm³.

TENSILE STRENGTH: 355 MPa.

 

TREATMENT: NONE, BURNISHED or NITRIDING?

1) NONE - No surface treatment, raw material (silver in colour).
BENEFITS: Shiny silver colour.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

2) BURNISHED - Oxidation treatment (black in colour).
BENEFITS: Rust resistant.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

3) PLASMA NITRIDING - Ion Nitriding Treatment (black in colour).
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.

MATERIAL: STANDARD or DIAGONAL?

Standard (left), has a hole spacing of 100mm. Diagonal (right) has an extra hole in the centre of each 4 hole grid, allowing for more possibilities!

KWT 28 both grids 2

 

TOLERANCES

FLATNESS: ±0.01mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
 
Questions? (03) 7020 0234   |   sales@koweldingtables.com.au
 
K28-TBL-04

2000 x 1000

~655

Your choice

$4,263 Ex. GST
$4,263
K28 Series Top - 1.5m x 1.5m

ALL K28 TABLE TOPS GET A FREE ETCHED RULER UPGRADE!

Millimetre ruler engraved via CNC in the top perimeter around all 4 sides of the table top valued at $100 ex gst.

RULERS shrt

MATERIAL: CAST or STEEL?

1) T300 - CAST IRON

PROPERTIES: Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and etching lines are rougher (see picture below).

HARDNESS: Differs per treatments: Standard / Burnished ~240HV  |   Nitriding ~450HV.

DENSITY: 7.25 g/cm³.

TENSILE STRENGTH: 345 MPa.

 

COMPARE SURFACE OF MATERIALS:CAST vs STEEL BIG Writing

2) S355 - STEEL

PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.

HARDNESS: Differs per treatments: Standard / Burnished ~250HV  |   Nitriding ~550HV.

DENSITY: 7.80 g/cm³.

TENSILE STRENGTH: 355 MPa.

 

TREATMENT: NONE, BURNISHED or NITRIDING?

1) NONE - No surface treatment, raw material (silver in colour).
BENEFITS: Shiny silver colour.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

2) BURNISHED - Oxidation treatment (black in colour).
BENEFITS: Rust resistant.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

3) PLASMA NITRIDING - Ion Nitriding Treatment (black in colour).
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.

MATERIAL: STANDARD or DIAGONAL?

Standard (left), has a hole spacing of 100mm. Diagonal (right) has an extra hole in the centre of each 4 hole grid, allowing for more possibilities!

KWT 28 both grids 2

 

TOLERANCES

FLATNESS: ±0.01mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
 
Questions? (03) 7020 0234   |   sales@koweldingtables.com.au
 
K28-TBL-05

1500 x 1500

~725

Your choice

$4,498 Ex. GST
$4,498
K28 Series Top - 2.4m x 1.2m

ALL K28 TABLE TOPS GET A FREE ETCHED RULER UPGRADE!

Millimetre ruler engraved via CNC in the top perimeter around all 4 sides of the table top valued at $100 ex gst.

RULERS shrt

MATERIAL: CAST or STEEL?

1) T300 - CAST IRON

PROPERTIES: Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and etching lines are rougher (see picture below).

HARDNESS: Differs per treatments: Standard / Burnished ~240HV  |   Nitriding ~450HV.

DENSITY: 7.25 g/cm³.

TENSILE STRENGTH: 345 MPa.

 

COMPARE SURFACE OF MATERIALS:CAST vs STEEL BIG Writing

2) S355 - STEEL

PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.

HARDNESS: Differs per treatments: Standard / Burnished ~250HV  |   Nitriding ~550HV.

DENSITY: 7.80 g/cm³.

TENSILE STRENGTH: 355 MPa.

 

TREATMENT: NONE, BURNISHED or NITRIDING?

1) NONE - No surface treatment, raw material (silver in colour).
BENEFITS: Shiny silver colour.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

2) BURNISHED - Oxidation treatment (black in colour).
BENEFITS: Rust resistant.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

3) PLASMA NITRIDING - Ion Nitriding Treatment (black in colour).
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.

MATERIAL: STANDARD or DIAGONAL?

Standard (left), has a hole spacing of 100mm. Diagonal (right) has an extra hole in the centre of each 4 hole grid, allowing for more possibilities!

KWT 28 both grids 2

 

TOLERANCES

FLATNESS: ±0.01mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
 
Questions? (03) 7020 0234   |   sales@koweldingtables.com.au
 
K28-TBL-06

2400 x 1200

~870

Your choice

$5,766 Ex. GST
$5,766
K28 Series Top - 3.0m x 1.5m

ALL K28 TABLE TOPS GET A FREE ETCHED RULER UPGRADE!

Millimetre ruler engraved via CNC in the top perimeter around all 4 sides of the table top valued at $100 ex gst.

RULERS shrt

MATERIAL: CAST or STEEL?

1) T300 - CAST IRON

PROPERTIES: Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and etching lines are rougher (see picture below).

HARDNESS: Differs per treatments: Standard / Burnished ~240HV  |   Nitriding ~450HV.

DENSITY: 7.25 g/cm³.

TENSILE STRENGTH: 345 MPa.

 

COMPARE SURFACE OF MATERIALS:CAST vs STEEL BIG Writing

2) S355 - STEEL

PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.

HARDNESS: Differs per treatments: Standard / Burnished ~250HV  |   Nitriding ~550HV.

DENSITY: 7.80 g/cm³.

TENSILE STRENGTH: 355 MPa.

 

TREATMENT: NONE, BURNISHED or NITRIDING?

1) NONE - No surface treatment, raw material (silver in colour).
BENEFITS: Shiny silver colour.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

2) BURNISHED - Oxidation treatment (black in colour).
BENEFITS: Rust resistant.
HARDNESS: Cast Iron ~230HV | Steel ~240HV.

3) PLASMA NITRIDING - Ion Nitriding Treatment (black in colour).
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.

MATERIAL: STANDARD or DIAGONAL?

Standard (left), has a hole spacing of 100mm. Diagonal (right) has an extra hole in the centre of each 4 hole grid, allowing for more possibilities!

KWT 28 both grids 2

 

TOLERANCES

FLATNESS: ±0.01mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
 
Questions? (03) 7020 0234   |   sales@koweldingtables.com.au
 
K28-TBL-07

3000 x 1500

~1365

Your choice

$7,506 Ex. GST
$7,506

LEGS

Levelling feet or movable levelling castors?

TIP: Click SHOW MORE to see more details on each product.

PICTURE Product SKU INFO BASE PRICE Customise SUBTOTAL ADD ITEM(S)
K28 DLG 20
200mm Legs - Disc Feet | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Each leg is rated for to hold up to 750KG. Powder coated as per your colour of choice. Featuring levelling feet, with ~50mm of fine tuning.

 

SHAPES - Round or Square.

  Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS STANDARD YELLOWS low res LEGS STANDARD BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-DLG-20

400-450

Adjustable Discs

$106 Ex. GST
$106
K28 DLG 35
350mm Legs - Disc Feet | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Each leg is rated for to hold up to 750KG. Powder coated as per your colour of choice. Featuring levelling feet, with ~50mm of fine tuning.

 

SHAPES - Round or Square.

  Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS STANDARD YELLOWS low res LEGS STANDARD BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-DLG-35

550-600

Adjustable Discs

$132 Ex. GST
$132
K28 DLG 45
450mm Legs - Disc Feet | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Each leg is rated for to hold up to 750KG. Powder coated as per your colour of choice. Featuring levelling feet, with ~50mm of fine tuning.

 

SHAPES - Round or Square.

  Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS STANDARD YELLOWS low res LEGS STANDARD BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-DLG-45

650-700

Adjustable Discs

$156 Ex. GST
$156
K28 DLG 62
620mm Legs - Disc Feet | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Each leg is rated for to hold up to 750KG. Powder coated as per your colour of choice. Featuring levelling feet, with ~50mm of fine tuning.

 

SHAPES - Round or Square.

  Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS STANDARD YELLOWS low res LEGS STANDARD BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-DLG-62

820-870

Adjustable Discs

$185 Ex. GST
$185
690 LEGS STANDARD MEASUREMENTS 1
690mm Legs - Disc Feet | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Each leg is rated for to hold up to 750KG. Powder coated as per your colour of choice. Featuring levelling feet, with ~50mm of fine tuning.

 

SHAPES - Round or Square.

  Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS STANDARD YELLOWS low res LEGS STANDARD BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-DLG-69

890-940

Adjustable Discs

$190 Ex. GST
$190
K28 cLG 20 1
200mm Legs - Level Castors | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Pre-installed w/ heavy duty castors featuring integrated levelling feet. Move your 1+ tonne table with ease, and use the levelling mechanism to level/ground your table when necessary.


leveling castors lowres1  

SHAPES - Round or Square.


Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS CASTORS YELLOWS low res LEGS CATORS BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-CLG-20

400-410

Levelling Castors

$192 Ex. GST
$192
K28 CLG 35
350mm Legs - Level Castors | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Pre-installed w/ heavy duty castors featuring integrated levelling feet. Move your 1+ tonne table with ease, and use the levelling mechanism to level/ground your table when necessary.


leveling castors lowres1  

SHAPES - Round or Square.


Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS CASTORS YELLOWS low res LEGS CATORS BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-CLG-35

550-560

Levelling Castors

$218 Ex. GST
$218
K28 CLG 45 1
450mm Legs - Level Castors | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Pre-installed w/ heavy duty castors featuring integrated levelling feet. Move your 1+ tonne table with ease, and use the levelling mechanism to level/ground your table when necessary.


leveling castors lowres1  

SHAPES - Round or Square.


Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS CASTORS YELLOWS low res LEGS CATORS BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-CLG-45

650-660

Levelling Castors

$245 Ex. GST
$245
K28 CLG 65
650mm Legs - Level Castors | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Pre-installed w/ heavy duty castors featuring integrated levelling feet. Move your 1+ tonne table with ease, and use the levelling mechanism to level/ground your table when necessary.


leveling castors lowres1  

SHAPES - Round or Square.


Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS CASTORS YELLOWS low res LEGS CATORS BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-CLG-65

850-860

Levelling Castors

$271 Ex. GST
$271
K28 CLG 73
730mm Legs - Level Castors | K28

NOTE: 4 x LEGS SUIT ALL TABLES EXCEPT 1.2m x 2.4m (6 LEGS) & 1.5m x 3m (8 LEGS).

 

MATERIAL: MILD STEEL

PROPERTIES: Pre-installed w/ heavy duty castors featuring integrated levelling feet. Move your 1+ tonne table with ease, and use the levelling mechanism to level/ground your table when necessary.


leveling castors lowres1  

SHAPES - Round or Square.


Sqrnd   COLOURS - Yellow, Orange, Red, Black, Blue, Green.   LEGS CASTORS YELLOWS low res LEGS CATORS BLUES low res Colours above are to be used as a visual representation only, product colour may vary.

MEASUREMENTS

TUBE DIMENSIONS: 89mm x 89mm.

OVERALL LEG HEIGHT (including CASTORS): ~730mm

WALL THICKNESS: 2.5mm.

 
Questions? (03) 7020 0234  |  sales@koweldingtables.com.au
K28-CLG-73

930-940

Levelling Castors

$274 Ex. GST
$274

K28 QUICK INFO

K28 CLAMPS

The “28” refers to its hole size of 28mm.

 

Heavier, and more robust than K16.

Suited for medium to heavy duty fabrication (e.g. 2mm tube to bridge cranes).

Can’t decide on K16 or K28? Check out our more info page for a more in depth analysis.

KWT-28 grid

SITE NAV

Every KO | WT product comes welded, assembled and machined to meet its precise tolerances.